Amari, S., Dill, G. and Howald, E. (2003). A new approach to solve dynamic fault trees. In Annual Reliability and Maintainability Symposium 374--379. IEEE Press, Piscataway, NJ.
Amyot, D., Logrippo, L. and Weiss, M. (2005). Generation of test purposes from Use Case Maps. Computer Networks 49 643--660.
Anderson-Cook, C. M., Patterson, A. and Hoerl, R. (2005). A structured problem-solving course for graduate students: Exposing students to six sigma as part of their university training. Quality and Reliability Engineering International 21 249--256.
Andrews, J. D. and Moss, T. R. (2002). Reliability and Risk Assessment, 2nd ed. Professional Engineering Publishing, London.
Andrews, J. D. and Ridley, L. M. (2002). Application of the cause-consequence diagram method to static systems. Reliability Engineering and System Safety 75 47--58.
Arthur, J. D. and Groner, M. K. (2005). An operational model for structuring the requirements generation process. Requirements Engineering 10 45--62.
Ayyub, B. M. (2001). Elicitation of Expert Opinions for Uncertainty and Risks. CRC Press, Boca Raton, FL.
Bagdonavicius, V., Bikelis, A. and Kazakevicius, V. (2005). Nonparametric confidence intervals for the number of spares required for a renewable system. Comm. Statist. Theory Methods 34 1203--1212.
Barendregt, A., van Noortwijk, J. M., van der Doef, M. and Holterman, S. R. (2005). Determining the time available for evacuation of a dike-ring area by expert judgement. In Proc. Ninth International Symposium on Stochastic Hydraulics (ISSH) (J. K. Vrijling, E. Ruijgh, B. Stalenberg, P. H. A. J. M. van Gelder, M. Verlaan, A. Zijderveld and P. Waarts, eds.). International Association of Hydraulic Engineering and Research (IAHR), Nijmegen, Netherlands.
Bedford, T. and Cooke, R. (2001). Probabilistic Risk Analysis: Foundations and Methods. Cambridge Univ. Press.
Bedford, T. and Quigley, J. (2004). Risk reduction prioritisation using decision analysis. Risk, Decision and Policy 9 223--236.
Bennett, T. R., Booker, J. M., Keller-McNulty, S. and Singpurwalla, N. D. (2003). Testing the untestable: Reliability in the 21st century. IEEE Transactions on Reliability 52 118--124.
Bierbaum, R. L., Brown, T. D. and Kerschen T. J. (2002). Model-based reliability analysis. IEEE Transactions on Reliability 51 133--140.
Blanchard, B. S. (2004). System Engineering Management, 3rd ed. Wiley, Hoboken, NJ.
Blanchard, B. S. and Fabrycky, W. J. (1998). Systems Engineering and Analysis, 3rd ed. Prentice Hall, Upper Saddle River, NJ.
Blischke, W. R. and Murthy, D. N. P. (2000). Reliability: Modeling, Prediction and Optimization. Wiley, New York.
Booker, J. D. and McNamara, L. A. (2002). Expertise and expert judgment in reliability characterization: A rigorous approach to eliciting, documenting and analyzing expert knowledge. In Engineering Design and Reliability Handbook (E. Nikolaidis, D. Ghiocel and S. Singhal, eds.) Chapter 13. CRC Press, Boca Raton, FL.
Boudali, H. and Dugan, J. B. (2005). A discrete-time Bayesian network reliability modeling and analysis framework. Reliability Engineering and System Safety 87 337--349.
Bouissou, M., Martin, F. and Ourghanlian, A. (1999). Assessment of a safety-critical system including software: A Bayesian belief network for evidence sources. In Annual Reliability and Maintainability Symposium 142--150. IEEE Press, Piscataway, NJ.
Bowles, J. B. (2000). Designing for failure: Managing the failure response through analysis. In Failure Prevention through Education: Getting at the Root Cause 62--69. ASM International, Materials Park, OH.
Bowles, J. B. (2003). An assessment of RPN prioritization in a failure modes effects and criticality analysis. In Annual Reliability and Maintainability Symposium 380--386. IEEE Press, Piscataway, NJ.
Bunea, C. and Mazzuchi, T. A. (2005). Bayesian accelerated life testing under competing failure modes. In Annual Reliability and Maintainability Symposium 152--157. IEEE Press, Piscataway, NJ.
Clausing, D. (1994). Total Quality Development: A Step-by-Step Guide to World Class Concurrent Engineering. ASME Press, New York.
Clemen, R. T. and Winkler, R. L. (1999). Combining probability distributions from experts in risk analysis. Risk Analysis 19 187--203.
Condra, L. (1993). Reliability Improvement with Design of Experiments. Dekker, New York.
Cooke, R. and Jager, E. (1998). Probabilistic model for the failure frequency of underground gas pipelines. Risk Analysis 18 511--527.
Cooke, R. M. (1991). Experts in Uncertainty. Oxford Univ. Press.
Cooke, R. M. (1994). Parameter fitting for uncertain models: Modelling uncertainty in small models. Reliability Engineering and System Safety 44 89--102.
Cooke, R. M. (2003). Book review of Elicitation of Expert Opinions for Uncertainty and Risks, by B. M. Ayyub. Fuzzy Sets and Systems 133 267--268.
Cooke, R. M. and Slijkhuis, K. A. (2003). Expert judgment in the uncertainty analysis of dike ring failure frequency. In Case Studies in Reliability and Maintenance (W. R. Blischke and D. N. P. Murthy, eds.) 331--350. Wiley, Hoboken, NJ.
Cowing, M. M., Paté-Cornell, M. E. and Glynn, P. W. (2004). Dynamic modeling of the tradeoff between productivity and safety in critical engineering systems. Reliability Engineering and System Safety 86 269--284.
Cysneiros, L. M. and Yu, E. (2003). Requirements engineering for large-scale multi-agent systems. Software Engineering for Large-Scale Multi-Agent Systems. Lecture Notes in Comput. Sci. 2603 39--56. Springer, New York.
Davis, T. P. (2003). Reliability improvement in automotive engineering. In Global Vehicle Reliability: Prediction and Optimization Techniques (J. E. Strutt and P. L. Hall, eds.) Chapter 4. Professional Engineering Publishing, London.
Dawson, R., Hall, J. and Davis, J. (2004). Performance-based management of flood defence systems. Proc. ICE, Water Management 157 35--44.
De Landtsheer, R., Letier, E. and van Lamsweerde, A. (2004). Deriving tabular event-based specifications from goal-oriented requirements models. Requirements Engineering 9 104--120.
de Wit, S. and Augenbroe, G. (2002). Analysis of uncertainty in building design evaluations and its implications. Energy and Buildings 34 951--958.
Department of Defense (1991). Military handbook: Reliability prediction of electronic equipment.
Doggett, A. M. (2004). A statistical comparison of three root cause analysis tools. J. Industrial Technology 20 (2), 9 pp.
Donzelli, P. (2004). A goal-driven and agent-based requirements engineering framework. Requirements Engineering 9 16--39.
Ebrahimi, N. B. (2003). Indirect assessment of system reliability. IEEE Transactions on Reliability 52 58--62.
Eden, C. (2004). Analyzing cognitive maps to help structure issues or problems. European J. Oper. Res. 159 673--686.
Embrey, D. E., Humphreys, P. C., Rosa, E. A., Kirwan, B. and Rea, K. (1984). SLIM-MAUD: An approach to assessing human error probabilities using structured expert judgement. Technical report NUREG/CR-3518, U.S. Nuclear Regulatory Commission.
Epstein, S. and Rauzy, A. (2005). Can we trust PRA? Reliability Engineering and System Safety 88 195--205.
Erkanli, A., Mazzuchi, T. A. and Soyer, R. (1998). Bayesian computations for a class of reliability growth models. Technometrics 40 14--23.
Faria, A. E. and Smith, J. Q. (1997). Conditionally externally Bayesian pooling operators in chain graphs. Ann. Statist. 25 1740--1761.
Fenton, N., Littlewood, B., Neil, M., Strigini, L., Sutcliffe, A. and Wright, D. (1998). Assessing dependability of safety critical systems using diverse evidence. IEE Proceedings Software 145 35--39.
Fenton, N. and Neil, M. (2001). Making decisions: Using Bayesian nets and MCDA. Knowledge-Based Systems 14 307--325.
Ferrell, W. (1994). Discrete subjective probabilities and decision analysis: Elicitation, calibration and combination. In Subjective Probability (G. Wright and P. Ayton, eds.) 411--451. Wiley, New York.
Fischhoff, B. (1989). Eliciting knowledge for analytical representation. IEEE Transactions on Systems, Man and Cybernetics 19 448--461.
Fragola, J. R. (1996). Reliability and risk analysis data base development: An historical perspective. Reliability Engineering and System Safety 51 125--136.
Fragola, J. R. and McFadden, R. H. (1995). Synthesis of failure rates for space station external orbital replaceable units. Reliability Engineering and System Safety 49 237--253.
Frank, M. V. (2005). View through the door of the SOFIA project. IEEE Transactions on Reliability 54 181--188.
Garthwaite, P. H., Kadane, J. B. and O'Hagan, A. (2005). Statistical methods for eliciting probability distributions. J. Amer. Statist. Assoc. 100 680--700.
Garvin, T. (2001). Analytical paradigms: The epistemological distances between scientists, policy makers and the public. Risk Analysis 21 443--455.
Gebraeel, N. Z., Lawley, M. A., Li, R. and Ryan, J. K. (2005). Residual-life distributions from component degradation signals: A Bayesian approach. IIE Transactions 37 543--557.
Genest, C., McConway, K. J. and Schervish, M. J. (1986). Characterization of externally Bayesian pooling operators. Ann. Statist. 14 487--501.
Goldstein, M. and Bedford, T. (2005). The Bayes linear approach to inference and decision making for a reliability programme. Technical Report 2005/14, Strathclyde Univ.
Guida, M. and Pulcini, G. (2005). Bayesian reliability assessment of repairable systems during multi-stage development programs. IIE Transactions 37 1071--1081.
Gutierrez-Pulido, H., Aguirre-Torres, V. and Christen, J. A. (2005). A practical method for obtaining prior distributions in reliability. IEEE Transactions on Reliability 54 262--269.
Hahn, G. J. (2005). Six sigma: 20 key lessons learned. Quality and Reliability Engineering International 21 225--233.
Hall, J. W., Meadowcroft, I. C., Lee, E. M. and van Gelder, P. H. A. J. M. (2002). Stochastic simulation of episodic soft coastal cliff recession. Coastal Engineering 46 159--174.
Hodge, R., Evans, M., Marshall, J., Quigley, J. and Walls, L. (2001). Eliciting engineering knowledge about reliability during design-lessons learnt from implementation. Quality and Reliability Engineering International 17 169--179.
Howick, S. (2003). Using system dynamics to analyse disruption and delay in complex projects for litigation: Can the modelling purposes be met? J. Oper. Res. Soc. 54 222--229.
Howick, S. (2005). Using system dynamics models with litigation audiences. European J. Oper. Res. 162 239--250.
Howick, S. and Eden, C. (2001). The impact of disruption and delay when compressing large projects: Going for incentives? J. Oper. Res. Soc. 52 26--34.
Howick, S. and Eden, C. (2004). On the nature of discontinuities in system dynamics modelling of disrupted projects. J. Oper. Res. Soc. 55 598--605.
Hsu, L. F. (2005). Group testing with a goal in estimating the number of defects under imperfect environmental stress screen levels. Comm. Statist. Theory Methods 34 1363--1377.
Huang, Y.-S. and Zhuo, Y.-F. (2004). Estimation of future breakdowns to determine optimal warranty policies for products with deterioration. Reliability Engineering and System Safety 84 163--168.
IEC 60300 series. International Electrotechnical Commission, Geneva.
International Electrotechnical Commission (1991). International electrotechnical vocabulary.
James, I., Marshall, J., Evans, M. and Newman, B. (2004). Reliability metrics and the REMM model. In Annual Reliability and Maintainability Symposium 474--479. IEEE Press, Piscataway, NJ.
Jenkinson, D. (2005). The elicitation of probabilities---a review of the statistical literature. BEEP working paper, Univ. Sheffield.
Johnson, V. E., Moosman, A. and Cotter, P. (2005). A hierarchical model for estimating the early reliability of complex systems. IEEE Transactions on Reliability 54 224--231.
Kadane, J. B. and Wolfson, L. J. (1998). Experiences in elicitation. The Statistician 47 3--19.
Kahneman, D., Slovic, P. and Tversky, A., eds. (1982). Judgment under Uncertainty: Heuristics and Biases. Cambridge Univ. Press.
Kallen, M. J. and Cooke, R. M. (2002). Expert aggregation with dependence. In Probabilistic Safety Assessment and Management (E. J. Bonano, A. L. Camp, M. J. Majors and R. A. Thompson, eds.) 1287--1294. North-Holland, Amsterdam.
Kaminskiy, M. P. and Krivtsov, V. V. (2005). A simple procedure for Bayesian estimation of the Weibull distribution. IEEE Transactions on Reliability 54 612--616.
Kanji, G. K. and Asher, M. (1996). 100 Methods for Total Quality Management. Sage, London.
Kearney, M., Marshall, J. and Newman, B. (2003). Comparison of reliability enhancement tests for electronic equipment. In Annual Reliability and Maintainability Symposium 435--440. IEEE Press, Piscataway, NJ.
Keeney, R. L. and von Winterfeldt, D. (1991). Eliciting probabilities from experts in complex technical problems. IEEE Transactions on Engineering Management 38 191--201.
Keller, W. W. and Modarres, M. (2005). A historical overview of probabilistic risk assessment development and its use in the nuclear power industry: A tribute to the late Professor Norman Carl Rasmussen. Reliability Engineering and System Safety 89 271--285.
Keller-McNulty, S. (2004). Reliability for the 21st century. In Mathematical Methods in Reliability 1--4.
Kerscher, W. J., Booker, J. M., Bement, T. R. and Meyer M. A. (1998). Characterizing reliability in a product/process design-assurance program. In Annual Reliability and Maintainability Symposium 105--112. IEEE Press, Piscataway, NJ.
Kerscher, W. J., Booker, J. M., Meyer, M. A. and Smith, R. E. (2003). PREDICT: A case study, using fuzzy logic. In Annual Reliability and Maintainability Symposium 188--195. IEEE Press, Piscataway, NJ.
Kletz, T. A. (1997). Hazop---past and future. Reliability Engineering and System Safety 55 263--266.
Kleyner, A. and Sandborn, P. (2005). A warranty forecasting model based on piecewise statistical distributions and stochastic simulation. Reliability Engineering and System Safety 88 207--214.
Kopnov, V. A. (1999). Optimal degradation processes control by two-level policies. Reliability Engineering and System Safety 66 1--11.
Korving, H. and van Noortwijk, J. M. (2006). Bayesian updating of a prediction model for sewer degradation. In 2nd International IWA Conference on Sewer Operation and Maintenance. Vienna.
Kraan, B. and Bedford, T. (2005). Probabilistic inversion of expert judgments in the quantification of model uncertainty. Management Science 51 995--1006.
Kunttu, S. and Kortelainen, H. (2004). Supporting maintenance decisions with expert and event data. In Annual Reliability and Maintainability Symposium 593--599. IEEE Press, Piscataway, NJ.
Kuo, W. and Prasad, V. R. (2000). An annotated overview of system-reliability optimization. IEEE Transactions on Reliability 49 176--187.
Lawless, J. (2000). Statistics in reliability. J. Amer. Statist. Assoc. 95 989--992.
Lee, B. H. (2001). Using FMEA models and ontologies to build diagnostic models. Artificial Intelligence for Engineering Design, Analysis and Manufacturing 15 281--293.
Leishman, D. and McNamara, L. (2002). Interlopers, translators, scribes and seers: Anthropology, knowledge representation and Bayesian statistics for predictive modeling in multidisciplinary science and engineering projects. In Proc. Conference on Visual Representations and Interpretations 2002. Liverpool.
Lindley, D. V. (2000). The philosophy of statistics (with discussion). The Statistician 49 293--337.
Lu, W. Y., Wang, W. and Christer A. H. (2005). The delay time modelling of preventive maintenance of plant based on subjective PM data and actual failure records. In Proc. 4th International Conference on Quality and Reliability 805--812.
Lutz, R. R. and Mikulski, I. C. (2003). Operational anomalies as a cause of safety-critical requirements evolution. J. Systems and Software 65 155--161.
Maiden, N., Gizikis, A. and Robertson, S. (2004). Provoking creativity: Imagine what your requirements could be like. IEEE Software 21 (5) 68--75.
Marquez, A. C., Heguedas, A. S. and Iung, B. (2005). Monte Carlo-based assessment of system availability. A case study for cogeneration plants. Reliability Engineering and System Safety 88 273--289.
Marshall, J. and Newman, R. (1998). Reliability enhancement methodology and modeling for electronic equipment---the REMM project. In Proc. ERA Avionics Conference and Exhibition 4.2.1--4.2.13.
Mathewson, A., O'Sullivan, P., Concannon, A., Foley, S., Minehane, S., Duane, R. and Palser, K. (1999). Modelling and simulation of reliability for design. Microelectronic Engineering 49 95--117.
Meeker, W. Q. and Escobar, L. A. (2004). Reliability: The other dimension of quality. Qual. Technol. Quant. Manag. 1 1--25.
Merkhofer M. W. (1987). Quantifying judgmental uncertainty: Methodology, experiences and insights. IEEE Transactions on Systems, Man and Cybernetics 17 741--752.
Meyer, M. A. and Booker, J. M. (2001). Eliciting and Analyzing Expert Judgment: A Practical Guide, 2nd ed. SIAM, Philadelphia.
Mosleh, A. and Apostolakis, G. (1986). The assessment of probability distributions form expert opinions with an application to seismic fragility curves. Risk Analysis 6 447--461.
Murthy, D. N. P., Solem, O. and Roren, T. (2004). Product warranty logistics: Issues and challenges. European J. Oper. Res. 156 110--126.
Neil, M., Littlewood, B. and Fenton, N. (1996). Applying Bayesian belief networks to system dependability assessment. In Proc. Safety Critical Systems Club Symposium 84--95. Springer, Berlin.
Neill, C. J. and Laplante, P. A. (2003). Requirements engineering: The state of the practice. IEEE Software 20 (6) 40--45.
Nelson, W. B. (2005). A bibliography of accelerated test plans. IEEE Transactions on Reliability 54 194--197.
Nelson, W. B. (2005). A bibliography of accelerated test plans. II. IEEE Transactions on Reliability 54 370--373.
O'Connor, P. D. T. (1991). Practical Reliability Engineering, 3rd ed. Wiley, New York.
O'Connor, P. D. T. (2000). Commentary: Reliability---past, present and future. IEEE Transactions on Reliability 49 335--341.
O'Hagan, A. (1998). Eliciting expert beliefs in substantial practical applications. The Statistician 47 21--35.
O'Hagan, A. (2005). Research in elicitation. Technical Report 557/05, Dept. Probability and Statistics, Univ. Sheffield.
O'Hagan, A. and Oakley, J. E. (2004). Probability is perfect, but we can't elicit it perfectly. Reliability Engineering and System Safety 85 1--3, 239--248.
Park, G.-J., Lee, T.-H., Lee, K. H. and Hwang, K. H. (2006). Robust design: An overview. AIAA Journal 44 181--191.
Patterson, A., Bonissone, P. and Pavese, M. (2005). Six sigma applied throughout the lifecycle of an automated decision system. Quality and Reliability Engineering International 21 275--292.
Percy, D. F. (2002). Bayesian enhanced strategic decision making for reliability. European J. Oper. Res. 139 133--145.
Petkova, V. T., Yuan, L., Ion, R. A. and Sander, P. C. (2005). Designing reliability information flows. Reliability Engineering and System Safety 88 147--155.
Phillips, L. D. (1982). Requisite decision modeling: A case study. J. Oper. Res. Soc. 33 303--311.
Phillips, L. D. (1984). A theory of requisite decision models. Acta Psychologica 56 29--48.
Phillips, M. J. (2004). Bayesian estimation from censored data with incomplete information. Quality and Reliability Engineering International 20 237--245.
Pidd, M. (2003). Tools for Thinking: Modelling in Management Science, 2nd ed. Wiley, Hoboken, NJ.
Quigley, J. and Walls, L. (1999). Measuring the effectiveness of reliability growth testing. Quality and Reliability Engineering International 15 87--93.
Quigley, J. and Walls, L. (2003). Confidence intervals for reliability-growth models with small sample-sizes. IEEE Transactions on Reliability 52 257--262.
Rausand, M. and Høyland, A. (2004). System Reliability Theory: Models, Statistical Methods and Applications, 2nd ed. Wiley, Hoboken, NJ.
Renn, O. (2004). The role of stakeholder involvement in risk communication. Internationale Zeitschrift für Kernenergie 49 602--612.
Renn, O. and Klinke, A. (2004). Systemic risks: A new challenge for risk management. EMBO Reports 5 S41--S46.
Rosqvist, T. (2000). Bayesian aggregation of experts' judgements on failure intensity. Reliability Engineering and System Safety 70 283--289.
Ruan, J., Shaya, N., Cassar, V., Pattinson, C., Ash-Rafzadeh, A. and Prasad, P. (2002). The house of quality and an enhanced vehicle attributes design process. In Proc. Fifth International Conference on Frontiers of Design and Manufacturing 1 106--113.
Saleh, J. H. and Marais, K. (2006). Highlights from the early (and pre-) history of reliability engineering. Reliability Engineering and System Safety 91 249--256.
Shishko, R. and Chamberlain, R. G. (1995). NASA Systems Engineering Handbook.
Shrader-Frechette, K. S. (1991). Risk and Rationality. Univ. California Press, Berkeley.
Sigurdsson, J. H., Walls, L. A. and Quigley, J. L. (2001). Bayesian belief nets for managing expert judgement and modelling reliability. Quality and Reliability Engineering International 17 181--190.
Singpurwalla, N. D. (1995). Survival in dynamic environments. Statist. Sci. 10 86--103.
Slovic, P., Finucane, M. L., Peters, E. and MacGregor, D. G. (2004). Risk as analysis and risk as feelings: Some thoughts about affect, reason, risk and rationality. Risk Analysis 24 311--322.
Stallinger, F. and Grünbacher, P. (2001). System dynamics modelling and simulation of collaborative requirements engineering. J. Systems and Software 59 311--321.
Stephens, D. and Crowder, M. (2004). Bayesian analysis of discrete time warranty data. Appl. Statist. 53 195--217.
Tan, C. M. and Neo, T.-K. (2002). QFD implementation in a discrete semiconductor industry. In Annual Reliability and Maintainability Symposium 484--489. IEEE Press, Piscataway, NJ.
Torres-Toledano, J. G. and Sucar, L. E. (1998). Bayesian networks for reliability analysis of complex systems. Progress in Artificial Intelligence--Iberamia 98. Lecture Notes in Comput. Sci. 1484 195--206. Springer, New York.
van Elst, N., Bedford, T., Jorissen, R. and Klaassen, D. (1998). A generic risk model for the closing procedure of moveable water barriers. In Safety and Reliability, Proc. ESREL '98 (H. A. Sandtorv, ed.) 2 435--442. Balkema, Rotterdam.
van Noortwijk, J. M., Dekker, A., Cooke, R. M. and Mazzuchi, T. A. (1992). Expert judgment in maintenance optimization. IEEE Transactions on Reliability 41 427--432.
Vaurio, J. K. (2001). Fault tree analysis of phased mission systems with repairable and non-repairable components. Reliability Engineering and System Safety 74 169--180.
Vlok, P. J., Coetzee, J. L., Banjevic, D., Jardine, A. K. S. and Makis, V. (2002). Optimal component replacement decisions using vibration monitoring and the proportional-hazards model. J. Oper. Res. Soc. 53 193--202.
Vrouwenvelder, A. C. W. M. (2003) Uncertainty analysis for flood defence systems in The Netherlands. In Safety and Reliability: Proc. ESREL 2003 (T. Bedford and P. van Gelder, eds.) 1 11--18. Balkema, Maastricht, The Netherlands.
Walls, L. and Quigley, J. (2001). Building prior distributions to support Bayesian reliability growth modelling using expert judgement. Reliability Engineering and System Safety 74 117--128.
Walls, L., Quigley, J. and Krasich, M. (2005). Comparison of two models for managing reliability growth during product design. IMA J. Management Mathematics 16 12--22.
Walls, L., Quigley, J. and Marshall, J. (2006). Modeling to support reliability enhancement during product development with applications in the U.K. aerospace industry. IEEE Transactions on Engineering Management 53 263--274.
Wang, W. (1997). Subjective estimation of the delay time distribution in maintenance modelling. European J. Oper. Res. 99 516--529.
Ward, H. and Christer A. H. (2005). Modelling the re-design decision for a warranted product. Reliability Engineering and System Safety 88 181--189.
Watahiki, K. and Saeki, M. (2004). Combining goal-oriented analysis and use case analysis. IEICE Transactions on Information and Systems E87D 822--830.
Weber, P. and Jouffe, L. (2006). Complex system reliability modelling with Dynamic Object Oriented Bayesian Networks (DOOBN). Reliability Engineering and System Safety 91 149--162.
White, D. (1995). Application of systems thinking to risk management: A review of the literature. Management Decision 33 (10) 35--45.
Willems, A., Janssen, M., Verstegen, C. and Bedford, T. (2005). Expert quantification of uncertainties in a risk analysis for an infrastructure project. J. Risk Research 8 3--17.
Wilson, A., McNamara, L. and Wilson, G. (2004). Information integration for complex systems. Technical Report LA-UR-04-6564, Los Alamos National Laboratory.
Wisse, B., Bedford, T. and Quigley, J. (2005). Combining expert judgements in the Bayes linear methodology. In Proc. CEA-JRC Workshop on the Use of Expert Judgement in Decision-Making (N. Devictor, V. Moulin and R. Bolado-Lavin, eds.). CEC, Aix-en-Provence.
Wright, G. and Bolger, F., eds. (1992). Expertise and Decision Support. Plenum, New York.
Yoo, J., Catanio, J., Paul, R. and Bieber, M. (2004). Relationship analysis in requirements engineering. Requirements Engineering 9 238--247.
Yu, D. C., Nguyen, T. C. and Haddawy, P. (1999). Bayesian network model for reliability assessment of power systems. IEEE Transactions on Power Systems 14 426--432.